CAS|Installation example

Vision inspector for PCB coating
Vision inspector for PCB coatingCompany Name: 00 SystemMain business: Manufacturing automobile parts (automobile dashboard, HUD and control parts, etc.)This equipment is a device that inspects the state of silicon coated on the PCB substrate. Silicon looks transparent to the human eye, but it emits blue light when irradiated with a special ultraviolet light, so the coated and uncoated areas of the substrate are checked with an accuracy of 0.1mm.CAS equipment is characterized by improved inspection accuracy and defect history management along with work convenience.
Visual Vacuum Leak Tester
Visual Vacuum Leak TesterCompany Name: 00 MachineMain business: Manufacturing pharmaceutics/ food related systems (washing and drying, inspection line)Vacuum Leak Tester is a system that inspects the vacuum condition by passing a high frequency wave through the drug ampoule produced by a pharmaceutical company. It generates a high frequency in the vacuum-treated ampoule and inspects the vacuum depending on whether it luminesces.In the past, light emission was inspected with the naked eye, but the vision inspector enables automatic inspection for vacuum and non-vacuum conditions. lt;Light emission when high frequency occurs gt;In addition, this equipment has a smart vision camera that allows the inspection without a separate PC configuration because it has a processor in it, increasing the satisfaction of customers who needed simpler facility implementation and cost reduction. lt;A photo of Smart camera equipment gt;As shown in the photo below, when it was normally vacuumed, purple light is emitted at the high frequency generation; but if not properly vacuumed, there is very weak or no light emission, which is automatically inspected by the vision program.
Inspector for foreign matters on the film
Inspector for foreign matters on the filmCompany Name: 000 KoreaMain business: Manufacturing of secondary battery separator The secondary battery is a rechargeable battery used in smartphones, notebooks, and electric vehicles, and the separator is a thin film that separates the +/- electrodes in the secondary battery to prevent electrical contact between electrodes.Equipment quantity: 2 in totalSystem: equipment to inspect foreign matters and pinholes generated during the manufacture of separation film lt;Schematic diagram of system gt; lt;Inspection method gt; Detection of the object to be detected (ex. pinhole)→ At the same time of object detection, the pixel values of the detection area are displayed primarily as horizontal * vertical sizes. lt; The measured value for each defect section processed with Vision Inspector gt;
High resolution line scanning
High resolution line scanning systemCompany Name: 00 TechMain business: Deco paper businessDeco Paper is a paper that various patterns and colors (natural wood, marble, stone, textile, abstract patterns, etc.) are printed on a raw paper.Deco paper is used as a design pattern in various places such as furniture, floors, and artificial marble. lt;A photo of PRINTECH KR gt; lt;Front of equipment gt; lt;Side of equipment gt; lt;A photo of Actual scanning gt;The wood in the photo is for testing, so its size is small. But, in the actual use, the processed wood as large as 2000mm long and 350mm wide can be scanned. lt;A photo of Scanned image sample gt;Scan and design the raw wood as shown below.Compared to other foreign scanners, it is far superior in price, driving time, and image quality etc.
Unmanned weighbridge system that measures truck weight
Large trucks come to and from the raw material warehouse several times a day. CAS unmanned weighing system is a solution that can easily weigh the truck without human workers.- Company Name: 00 Corporation- Installed products: Unmanned weighing solution (truck scale (with load cell WBK), camera, LMT)‘CAS unmanned weighbridge system for truck history management’ ▲ WBK load cell used for truck scaleInstallation information1) Unmanned panel system2) Camera recording/storing system3) LMT (CAS): Module type installation CAS unmanned weigbridge system is a pit type weighing system. For its supply, we closely stuck to it from installation to test run.
Supply of integrated solution for rebar load inspection
When rebar is drawn out, if the left and right sides are not properly leveled, the rebar may bend or the axial direction may be twisted.Load inspection is important for setting the accurate rebar pull-out strength.- Company name: 00 Electric- Installed product: Load test integrated solution (load cell LSU, indicator, software (measuring program))‘Integrated solution that measures the load application state’ CAS designed the inspection equipment with LSU load cell through consultation with 00 Electrics, and provided an integrated solution to manage the measured load through an indicator (screen) and software program.Key functions 1) Measurement of load application state2) Full graphic display3) Data storage and analysis In this case, our integrated solution not only for simple load test but also for data collection satisfied both field workers and monitoring room.
It measures the spraying power of glass cleaning liquid
This is a case that a glass cleaning test facility was supplied to 000 Tec, a mid-sized Korean company that manufactures semiconductors, display equipment and materials.- Company Name: 000 Tech- Installed product: Test facility equipped with load cell BCLThe key of glass cleaning is a uniform spraying power! Accurate and reliable cleaning is possible only when the cleaning solution is sprayed with an even force.CAS applied the BCL load cell to the portable tester to accurately measure the cleaning force applied to the glass.
Force resistance meter on model ship
We present a delivery case of the test equipment used for the model ship made by 00 University.In order to measure the external resistance received by a moving ship, it is essential to measure the force applied in all directions!To solve this problem, CAS applied a multi-axis load cell MAS to the tester.Institution name: 00 UniversityInstalled product: Multi-axis load cell MAS‘Multi-axis load cell MAS is applied’ With multi-axis load cell MAS, the external force resistance on the model ship could be effectively measured.
Supply case of portable fuel economy tester
This is a supply case of portable fuel economy tester.Company name: 00 Heavy IndustriesInstalled product: portable fuel economy tester The installed test facilities are: weighing hopper, magnetic level gauge, temperature sensor, manual ball valve, temperature gauge indicator, level indicator, and load cell.Equipped with an indicator, it was used to calculate the fuel efficiency of a small ship. It calculated the fuel consumed per minute by operating the engine of small ship after pouring 1,000kg bunker A oil into the weighing hopper.
Explosion-proof load cell, indicator, electronic scale
An explosion-proof load cell, an indicator, and an electronic scale were supplied to a plant company located in Ansan, which were used to manufacture an explosion-proof hopper.- Company Name: 00 Plant- Installed products: load cell, indicator, electronic scale

View more+

Installation Example

전화상담

1577-5578

게시판 글남기기